Description

McKinney® ElectroLynx Quick Connect Retrofit Cables

McKinney® ElectroLynx Quick Connect Retrofit Cables allow installers to connect electrified door hardware when doors do not come pre-wired with ElectroLynx® cables. They provide a constant flow of current from the power source through the hinge directly to the hardware, ensuring reliable operation for both metal and wood doors.

Features

• For use in remote door monitoring and access control systems
• Allows continuous current from power source through the hinge to electrified hardware
• Molex connectors on one or both ends
• Compatible with MM option on most full mortise hinges
• Retrofit cables available if door was not ordered with pre-installed ElectroLynx® cable
• Available in 12-conductor with Molex both ends (metal doors) or 12-conductor with Molex one end and pinned one end (wood doors)

• Wire harness options:

• Between hinge and the end of an exit device

  • QC-C003 QC12 – 3″ Wire Harness; 8 & 4 Pin Connector w/12 wires

  • QC-C006 QC12 – 6″ Wire Harness; 8 & 4 Pin Connector w/12 wires

  • QC-C012 QC12 – 12″ Wire Harness; 8 & 4 Pin Connector w/12 wires

• Between hinge and through the door to the lockset or exit device trim

• • QC-C200 QC12 – 26″ Wire Harness; 8 & 4 Pin Connector w/12 wires

  • QC-C206 QC12 – 32″ Wire Harness; 8 & 4 Pin Connector w/12 wires

  • QC-C300 QC12 – 38″ Wire Harness; 8 & 4 Pin Connector w/12 wires

  • QC-C306 QC12 – 44″ Wire Harness; 8 & 4 Pin Connector w/12 wires

  • QC-C400 QC12 – 50″ Wire Harness; 8 & 4 Pin Connector w/12 wires

• From the hinge location, up the jamb to above the ceiling, or up and around full lite or half lite metal door.

  • QC-C1500 QC12 – 15′ 2″ Wire Harness; 8 & 4 Pin Connector w/12 wires

Benefits

• Quick and simple installation, saving time and effort
• Concealed wiring eliminates visible external cables, reducing tampering and improving door aesthetics
• Brass eyelets enhance durability and protect the wiring
• Fully compatible with ASSA ABLOY Group electro-mechanical hardware for coordinated performance

Application / Installation

• Designed for retrofitting doors that were not ordered with pre-installed ElectroLynx® cables
• Cable lengths range from 3″ for hinge-to-exit-device connections up to 15′ for routing around full lite metal doors
• Easy connection via Molex connectors ensures proper alignment and reliable current flow